Wood variation in physico-mechanical properties of Dalbergia sissoo Roxb. ex DC. from local markets of Himachal Pradesh

Wood variation in physico-mechanical properties of Dalbergia sissoo Roxb. ex DC. from local markets of Himachal Pradesh

Authors

  • Pavin Praize Sunny Dr. Y.S. Parmar University of Horticulture and Forestry, Nauni (Solan)
  • Bhupender Dutt Dr. Y.S. Parmar University of Horticulture and Forestry, Nauni (Solan)
  • Kulwant Rai Sharma Dr. Y.S. Parmar University of Horticulture and Forestry, Nauni (Solan)
  • Bandana Dhiman Dr. Y.S. Parmar University of Horticulture and Forestry, Nauni (Solan)
  • Yogesh Yadavao Sumthane Dr. Y.S. Parmar University of Horticulture and Forestry, Nauni (Solan)

Keywords:

moisture, specific gravity

Abstract

Attempt was made to evaluate the wood variation in Dalbergia sissoo (shisham) from the local markets of Himachal Pradesh. The highest moisture content (20.17%) was observed in the wood samples of Nalagarh site. Highest specific gravity of 0.644 was observed in Dattowal and lowest (0.748) in Nalagarh site. Significant variation in mechanical properties was observed for all the studied parameters. The maximum bending strength was recorded in Baroh and Sundernagar site (0.006 kN/mm2) and maximum tensile strength (0.094 kN/mm2) was noticed in the wood samples from Baroh site. The maximum compressive strength parallel to grain (0.069 kN/mm2) was observed in Kangu site and maximum compressive strength perpendicular to grain (0.038 kN/mm2) was found in Baroh site. The maximum modulus of elasticity parallel to grain (0.231 kN/mm2) was recorded in Ghumarwin and maximum modulus of elasticity perpendicular to grain (1.653 kN/mm2) was noticed in wood samples of Galore site. The greater modulus of elasticity due to tension and bending was found in the wood samples of the sites Baroh (2.876 kN/mm2) and Kangu (10.369 kN/mm2) respectively. The maximum bending modulus of rupture was observed in the wood samples from the sites of Sundernagar (0.116 kN/mm2) and for teak was found to be 0.323 kN/mm2. The maximum elongation for shisham wood samples for bending was found in Nalagarh site (0.039 mm) and for tension in the site of Sarahan (0.033 mm). The mechanical properties of shisham wood were compared with standard teak wood samples and it was found that the wood samples of shisham were superior in some mechanical properties.

References

Hingston, A.J., Collins, C.D., Murphy, R.J. and Lester, J.N. 2001. Leaching of chromated copper arsenate wood preservatives: A Review. Environment Pollution 111: 53-56.

Luna RK. 2005. Plantation trees (1st Edn.). International Book Distributors., Dehradun, India 975p.

Peng, L., Fang, C. and Jiaju, Y. 1988. Identification, properties and uses of some Southeast Asian woods. International Tropical Timber Organization, Yokohama, Japan. 201p.

Rahman, M.M., Fujiwara, S., Kanagawa, Y. 2005. Variations in volume and dimensions of rays and their effect on wood properties of Teak. Wood and Fiber Science 37: 497–504

Rowell, R.M. 2013. Handbook of wood chemistry and wood composites (2nd Ed.). CRC Press. Boca Raton, London, New York. 687p.

Schniewind, A.P. 1989. Concise encyclopedia of wood and wood-based materials. Pergamon press, Oxford, United Kingdom 248p.

Downloads

Published

18-07-2019

How to Cite

Sunny, P. P., Dutt, B., Sharma, K. R., Dhiman, B., & Sumthane, Y. Y. (2019). Wood variation in physico-mechanical properties of Dalbergia sissoo Roxb. ex DC. from local markets of Himachal Pradesh. Journal of Tropical Agriculture, 57(1). Retrieved from https://jtropag.kau.in/index.php/ojs2/article/view/650

Issue

Vol. 57 No. 1 (2019)

Section

Regular papers

License

Copyright © 2001-11 Kerala Agricultural University. Some rights reserved. This journal and the individual contributions contained in it are protected under copyright by the Kerala Agricultural University and the following terms and conditions apply to their use; Photocopying Single photocopies of single articles may be made for personal use as allowed by national copyright laws. Permission of the publisher and payment of a fee is required for all other photocopying including multiple or systematic copying, copying for advertising or promotional purposes, resale, and all forms of document delivery. Permission may be sought directly from the Editor, Journal of Tropical Agriculture, Department of Agronomy, College of Horticulture,, Kerala Agricultural University, KAU PO, Thrissur 680 656, Kerala, India. (Phone: +91-487-2438325; Fax +91-487-2371040; E-mail: editor.jta@kau.in. Derivative works Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institution. Permission of the Publisher is required for resale or distribution outside the institution. Permission of the Publisher is required for all other derivative works, including compilations and translations. Notice No responsibility is assumed by the Publisher for any injury and/or damage to persons or property as a matter of products, liability, negligence, or otherwise, or from any use of any methods, products, instructions or ideas contained in the material herein.