Modelling the yield, water requirement, and water productivity of major tropical tuber crops using FAO-AquaCrop - A study over the main growing areas of India

Modelling the yield, water requirement, and water productivity of major tropical tuber crops using FAO-AquaCrop - A study over the main growing areas of India

Authors

  • Raji Pushpalatha DST-Woman Scientist, ICAR-Central Tuber Crops Research Institute, Sreekaryam-695017, Trivandrum, Kerala
  • S. Sunitha ICAR-Central Tuber Crops Research Institute, Thiruvannathapuram
  • V.S. Santhosh Mithra ICAR-Central Tuber Crops Research Institute, Thiruvannathapuram
  • Byju Gangadharan ICAR-Central Tuber Crops Research Institute, Thiruvannathapuram

Keywords:

climate change, cassava, sweet potato, AquaCrop, simulations, yield, water requirement

Abstract

A study was conducted to test and understand the reliability of the FAO-AquaCrop model for cassava and sweet potato over the major growing areas of India. This is the first study in India testing the FAO-AquaCrop model for the yield estimation of tropical tuber crops. Salem in Tamil Nadu, Thiruvananthapuram in Kerala, and West Godavari in Andhra Pradesh were selected for cassava, and Bhubaneswar in Odisha, Faizabad in Uttar Pradesh, and Kalyani in West Bengal were selected for sweet potato. The model simulations of cassava and sweet potato indicated the suitability of the FAO-AquaCrop model in estimating the crop’s yield irrespective of the agro-climatological conditions with percentage error values ranging from -2.33 to 3.92% and 0.3 to 5% for cassava and sweet potato, respectively. The model also estimated gross irrigation requirements and their corresponding water productivity values. The estimated water productivity of cassava and sweet potato ranged from 3-4 kg m-3 and 4-8 kg m-3, respectively. The water productivity of these tuber crops were higher than that of the major food grain crops and indicated their suitability in the context of water scarce conditions and ensuring food security. The information about the water requirement and crop water productivity can be used at farm level to utilize the available water resources and maximize production to ensure food security.

References

Adeboye, O.B., Schultz, B., Adekalu K.O., Prasad, K.C., 2019. Performance evaluation of AquaCrop in simulating soil water storage, yield, and water productivity of rainfed soybeans (Glycine max L. merr) in Ile-Ife, Nigeria. Agricultural Water Management 213, 1130-1146.

Annual Report. 2012-2013. Indian Council of Agricultural Research (ICAR)-Cntral Tuber Crops Research Institute (CTCRI), Thiruvananthapuram, Kerala, India. Pp.124.

Annual Report. 2013-2014. Indian Council of Agricultural Research (ICAR)-Cntral Tuber Crops Research Institute (CTCRI), Thiruvananthapuram, Kerala, India. Pp.159

Annual Report. 2014-2015. Indian Council of Agricultural Research (ICAR)-Cntral Tuber Crops Research Institute (CTCRI), Thiruvananthapuram, Kerala, India. Pp.168

Beletse Y.G., Laurie R., Plooy, C.P.D., Laurie, S.M., van den Berg, A., 2013. Simulating the yield response of orange fleshed sweet potato Ísondlo’to water stress using the FAO AquaCrop model. Eds.: K. Hannweg and M. Penter. Proc. 2nd All Africa Horticulture Congress, Acta Hort. 1007, ISHS.

Dua, V.K., Govindakrishnan, P.M., Singh, B.P., 2014. Calibration of WOFOST model for potato in India. Potato Journal 41(2), 105-112

Kyu, L.S., An, D.T., 2019. Calibration and validation of the FAO-AquaCrop model for cassava in the Dong Xuan cultivation area of Phu Yen province using irrigation. Research on Crops 20(3), 555-562.

Manners, R., van Etten, J., 2018. Are agricultural researchers working on the right crops to enable food and nutrition security under future climates? Global Environmental Change 53, 182-194.

McCallum, E.J., Anjanappa, R.B., Gruissem, W., 2017. Tackling agriculturally relevant diseases in the staple crop cassava. Current Opinion in Plant Biology 38, 50-58.

Molden, D. 1997. Accounting for water use and productivity. SWIM Paper 1. Colombo, Sri Lanka: International Irrigation Management Institute. ISBN 92-9090-349 X.

Mosai, B., Taghvaeian, S., Gowda, P.H., Marek, G., Boman, R., 2020. Validation and application of quaCrop for irrigated cotton in the Southern Great Plains of US. Irrigation Science, https://doi.org/10.1007/s00271-020-00665-4.

Nyathi, M.K., van Halsema, G.E., Annandale, J.G., Struik, P.C., 2018. Calibration and validation of the AquaCrop model for repeatedly harvested leafy vegetables grown under different irrigation regimes. Agricultural Water Management 208, 107-119.

Pirmoradian, N., Davatgar, N., 2019. Simulating the effects of climatic fluctuations on rice irrigation water requirement using AquaCrop. Agricultural Water Management 213, 97-106.

Putpeerawit, P., Sojikul, P., Thitamadee, S., Narangajavana, J., 2017. Genome-wide analysis of aquaporin gene family and their responses to water-deficit stress conditions in cassava. Plant Physiology and Biochemistry 121, 118-127.

Raes, D., Steduto, P., Hsiao, T.C., Fereres, E., 2018. FAO-crop-water producitivity model to simulate yield response to water. AquaCrop Version 6.0-6.1 Reference Manual, pp 25.

Santhosh Mithra, V.S., Puhpalatha, R., Sunitha, S., George, J., Singh, PP., et al., 2019. Evaluation of a crop growth model for sweet potato over a set of agro-climatic conditions in India. Current Science 117 (1), 110-113.

Santhosh Mithra, V.S., Somasundharam, K., 2008. A model to simulate sweet potato growth. World Appl. Sci. J., 4(4), 568-577.

Santhosh Mithra, V.S., Sreekumar, Ravindran, C.S., 2012. Computer simulation of cassava growth: a tool for realizing the potential yield. Archives of Agronomy and Soil Science 41, 1-21.

Singh, A., Saha, S., Mondal, S., 2013. Modeling irrigated wheat production using the FAO AquaCrop model in West Bengal, India, for sustainable agriculture. Irrigation and Drainage 62, 50-56.

Somasundharam, K., and Santhosh Mitra, VS., 2008. Madhuram- A simulation model for sweet potato growth. World J. Agric. Sci., 4(2), 241–254.

Steduto, P. et al., 2009. Concepts and Applications of AquaCrop: The FAO Crop Water Productivity Model. In: Cao W., White J.W., Wang E. (eds) Crop Modeling and Decision Support. Springer, Berlin, Heidelberg.

Tironi, L.F., Streck, N.A., Santos, A.T.L., de Freitas, C.P.O., Uhlmann, L.O., de Oliveira Junior, W.C., Ferraz, S.E.T., 2017. Estimating cassava yield in future IPCC climate scenarios for the Rio Grande do Sul State, Brazil. Ciência Rural, Santa Maria 47(2), e20160315.

Titus, P., Lawrence, J., 2015. Cassava and sweet potato - suitability of popular Caribbean Varieties for value added product development. Inter-American Institute for Cooperation on Agriculture (IICA), 122p, ISBN: 978-92-9248-587-0.

Woolfe J., 1992. Sweet potato an untapped food resource. Cambridge, UK: Cambridge University Press.

Downloads

Published

26-02-2022

How to Cite

Pushpalatha, R., Sunitha, S., Mithra, V. S., & Gangadharan, B. (2022). Modelling the yield, water requirement, and water productivity of major tropical tuber crops using FAO-AquaCrop - A study over the main growing areas of India. Journal of Tropical Agriculture, 59(2). Retrieved from https://jtropag.kau.in/index.php/ojs2/article/view/962

Issue

Section

Articles

Similar Articles

<< < 22 23 24 25 26 27 28 29 30 31 > >> 

You may also start an advanced similarity search for this article.

Loading...