Planter design in relation to the physical properties of seeds
Keywords:
coefficient of restitution, cotton, maize, red gram, sphericity of seedsAbstract
Physical properties namely, length, breadth, surface area, roundness, equivalent diameter, sphericity, seed weight, true density, angle of repose and coefficient of restitution of maize, red gram and cotton seeds were evaluated as design parameters for a planter. Thickness and cell diameters of the seed metering discs were designed in reference to the maximum breadth and length of seeds. Both roundness and sphericity affect seed flow through the various components of the planter. Roundness of maize, red gram, and cotton were 1.14 ± 0.14, 1.15 ± 0.10, and 1.26 ± 0.10 respectively, while sphericity of these seeds in the natural rest position were 0.621 ± 0.065, 0.750 ± 0.016, 0.550 ± 0.016 respectively. To ensure free flow of seeds, the slope of the seed hopper was, therefore, fixed at 30o, which is modestly higher than the average angle of repose of seeds. In addition, the inner surfaces of the seed transfer cup was imbedded with 3 mm thick rubber sheet as its coefficient of restitution was lower than mild steel sheet of same thickness.Downloads
Published
How to Cite
Issue
Section
License
Copyright © 2001-11 Kerala Agricultural University. Some rights reserved. This journal and the individual contributions contained in it are protected under copyright by the Kerala Agricultural University and the following terms and conditions apply to their use; Photocopying Single photocopies of single articles may be made for personal use as allowed by national copyright laws. Permission of the publisher and payment of a fee is required for all other photocopying including multiple or systematic copying, copying for advertising or promotional purposes, resale, and all forms of document delivery. Permission may be sought directly from the Editor, Journal of Tropical Agriculture, Department of Agronomy, College of Horticulture,, Kerala Agricultural University, KAU PO, Thrissur 680 656, Kerala, India. (Phone: +91-487-2438325; Fax +91-487-2371040; E-mail: editor.jta@kau.in. Derivative works Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institution. Permission of the Publisher is required for resale or distribution outside the institution. Permission of the Publisher is required for all other derivative works, including compilations and translations. Notice No responsibility is assumed by the Publisher for any injury and/or damage to persons or property as a matter of products, liability, negligence, or otherwise, or from any use of any methods, products, instructions or ideas contained in the material herein.